Realtime Song Recording - E-Mu XL-7 Command Station Owner's Manual

Realtime Song
Recording
O O O O
To Quick-Select a MIDI
Channel:
1. Press and hold Tap.
2. Press the Track Enable/Mute
button corresponding to the
MIDI channel you wish to select.
110 E-MU Systems
Realtime Song Recording lays down a single track which may contain
multichannel: note, program change and controller data (but no
Realtime data will retain its recorded channel information so you can lay in
multichannel note and controller information. Multiple channel infor-
mation received over MIDI will also be recorded.
To Record a Song in Realtime mode
Press the Song mode button. The screen shown below appears.
1.
Song Tempo
(if song events selected)
:150
0
000
Select a Blank song to begin recording using the data entry control.
2.
Press the Record button once to select Realtime Record mode. The
3.
Realtime record LED illuminates and the screen shown below appears.
If you have already step recorded any pattern inserts, their numbers will
appear on the lower line of the display.
Set the metronome to On or Rec if you want a timing reference.
4.
Song Tempo
:130
Quan: off
Correct
Press the Play button to begin realtime recording. As in Pattern Record
5.
Mode, the Record button can be pressed at any time to disable
recording. Similarly, the Play button can be pressed while recording to
affect a "record-pause" mode.
To Erase Specific Notes:
Press the Erase button in Realtime Record mode and hold down the
6.
keyboard note you wish to erase. The note will be erased when it
comes around in the pattern.
Song Meter
(for metronome)
M: 04 / 4
Start of IT
Song Name
- - - REC - - -
Met: rec
Auto- Metronome
on/off/rec
Current Location
Bar: 001 . 1
Current Location
Bar: 001 . 1
CntIn: 0
Count-in
Bars
Sequencer
Song Mode
SysEx).