Scale/Shift Velocity - E-Mu XL-7 Command Station Owner's Manual

Scale/Shift Velocity

O O O O
Tip: To set all notes to a
particular velocity value, set
Scale to 0%, then set Shift to the
desired velocity.
This filter allows you to either scale (multiply by a value) or shift (add a
value to) the velocity values of notes in a pattern. The Scale function is
performed before the Shift value is added.
Scale - Multiplies all note-on velocities by a percentage from 0% to
125%. Scaling by 100% would leave all velocity values
untouched. Scaling by 50% would cut all velocity values in half.
Shift - Adds or subtracts a specific velocity value (-127 to +127) to
every note-on event in the pattern.
To Scale or Shift Velocity
Select the pattern you wish to edit.
1.
Select the Track(s) you wish to Scale or Shift using the Track Enable/
2.
Mute buttons.
Press the Pattern Edit button.
3.
Scroll to the Scale/Shift Velocity screen shown below using the data
4.
entry control.
SCALE/SHIFT VELOCITY
Scale: 87%
Select the amount of velocity scaling or shift. The Home/Enter LED
5.
will be flashing once the cursor is moved to the lower line of the
display.
Press Enter. The screen shown below appears to remind you to select
6.
the tracks you want to velocity scale or shift. Select a key range. The
default setting is all keys.
SELECT TRACKS
Key Range: C-2
Press Enter to change velocity in the selected tracks. Press any other
7.
button to Cancel the operation.
Shift: +0
to:G8
XL-7 Owners Manual 87
Sequencer
Pattern Edit Menu