Operating System Upgrades - E-Mu XL-7 Command Station Owner's Manual

Control # Function
113
114
115
116
117
118
119
120 All Sound Off
121 Reset All Contlrs
122 Local Cntrl on/off
123 All Notes Off
124 Omni Mode Off
125 Omni Mode On
126 Poly Mode Off
127 Poly Mode On
NOTES: *
XL-7 can transmit and receive ANY continuous controller number
from 1 to 95. Because of XL-7's powerful synth engine, many of the
standard MIDI controllers can be user programmed to provide the
desired function. A "Yes" response in this chart means that a
controller is programmed by default in XL-7.
Controller 79 is hard-coded to the Mix Output parameter.
0=Use Preset, 1=Send 1, 2=Send 2, 3=Send 3, 4=Send 4
Controller 80 is hard-coded to the Arp Status parameter.
0=Off, 1=On, 2=P (preset), 3=M (master)
Value of 0 = reset all except vol & pan; value of 127 = reset all.
Other: Pan: -64 = hard left, +63 = hard right

Operating System Upgrades

XL-7's operating system can be updated using the USB port or the MIDI
interface using E-MU's E-Loader utility. E-Loader comes with a set of
detailed instructions for upgrading the operating system.
You'll find E-Loader on the CD-ROM that came with your XL-7, or you can
download it from the E-MU web site (www.emu.com). There you will also
find the latest software revision for your XL-7
Transmitted Recognized
No Yes
No Yes
No No
No Yes
No Yes
No Yes
No Yes
No Yes
XL-7 Owners Manual 351
Appendix
MIDI
Remarks
See note
if enabled
if enabled
if enabled
if enabled