E-Mu XL-7 Command Station Owner's Manual page 121

   
The 16 tracks of a song
can be assigned to either the A
or B channels using the "Song
Channel Assign" function on
page 123.
To Insert a Pattern at the beginning of a Song
Scroll to the first step in the song and press Repeat.
9.
Press the (-)Track/Channel key to move back one step.
10.
Select the desired pattern, then press Enter.
11.
Inserting Track Mutes
You can enable or disable Track Mutes anywhere in the song by simply
12.
selecting them while in record mode. Mute commands are recorded as
"hidden" text events in the linear song track. Track mutes can be erased
or modified in the Song Event List Editor.
Stop the Song
Turn the data entry control counter-clockwise until you find the
13.
STOP command. This will be the last step of your song.
Time to Save?
Changes are not made permanent until you Save the song. An asterisk
14.
will appear in the Song display if the Songs has been modified and
needs to be saved. The Save/Copy button LED will also be flashing.
Press Save/Copy, scroll to the Save Song screen, select a location and
press Enter.
The following parameters are also saved with the Song. Set these param-
eters, then save the song again if you wish. The "Event Source" option in
the Song Edit menu (page 113) determines whether song or pattern events
will be used in the song.
• Initial Tempo
• Volume for 16 channels
• Pan for 16 channels
• Mix Output setup for 16 channels
• Arp channel status (off/on/preset/master) for 16 channels
• Master FX setup
• Event Source
Sequencer
Song Mode
XL-7 Owners Manual 109