Main Functions - Midland CT 890 Instruction Manual

Main functions

• Dual band (VHF/UHF) displayed
• Frequency band (to set according to the country/area of use): 144-146
MHz & 430-440MHz (Rx / Tx).
• Working mode: UHF-VHF, VHF-VHF o UHF-UHF
• Output power: 5W VHF /4W UHF
• Memory channels: 999
• Full Duplex
• Repeater function
• Wide colorful LCD display
• Very high efficiency Li-Ion battery pack 2600mAh
• Repeater tones
• Individual/group selective calls
• VOX function
• Chronometer
• 105 + 105 DCS codes and 50 CTCSS tones
• "VOICE" function
• SOS function
• Wide/narrow bandwidth selection 25kHz/12,5 kHz
• Channel number, Channel + Frequency or Channel name display
mode available
• Reverse frequency
• Scan
• Flashlight
• FM Radio receiver
• Frequency step: 5 kHz, 6.25 kHz, 10 kHz, 12.5 kHz, 25 kHz, 50 kHz or
100kHz
• High/low power selection: high (4-5W) / low (1W)
• Frequency offset
• Repeater shift
• "Busy Channel Lock Out" function
• Tx power level indicator on the display
• Low battery vocal indicator
• Roger Beep
• TOT (time out timer) function
• Keypad lock
• Function/channel reset
2 | Midland CT890 instruction guide