Table of Contents
Advertisement
Problem
•
Image is out of
focus
•
The image is
stretched when
displaying 16:9
DVD title
•
Image is too small
or too large
GS Series User Manual
020-000724-02 Rev. 1 (10-2015)
-
Make sure both lens caps (front and back) are removed.
-
Adjust lens focus to fit.
-
Make sure the projection screen is between the required
distance.
-
When you play anamorphic DVD or 16:9 DVD, the projector
will show the best image when the projector display mode is
set to 16:9 in the OSD.
-
If you play 4:3 format DVD titles, please change the format
to 4:3 in the projector OSD.
-
If the image is still stretched, you will also need to adjust the
aspect ratio by setting the display format as 16:9 (wide)
aspect ratio type on your DVD player.
-
Adjust lens zoom to fit.
-
If it does not fill the screen properly, verify that the correct
lens is in use or change the position of the projector.
Section 5: TROUBLESHOOTING
Solution
5-3
Advertisement
Table of Contents
