Table of Contents
Advertisement
2 If the IP address of the projector is known, enter the IP address and
click the "Connect" button. If the IP address is not known, click the
"Search" button to search for the projector on the network and select
the projector to which you want to connect. Select the option "Directly"
in order to proceed to the log in interface.
3 Input "User type" and "Password" in the log-in interface. Select the
display port (the default is full screen). Obtain the " Normal " user's
password from the OSD menu Main Menu > Configuration >
Communications > WLAN.
GS Series User Manual
020-000724-02 Rev. 1 (10-2015)
Section 4: OPERATION
4-33
Advertisement
Table of Contents
