Propane Conversion Kit - Travis Industries Spirit DV Owner's Manual

O
PTIONAL
P 32
AGE
4 Follow the directions below to remove the natural gas orifice. Apply thread sealant to the LP orifice
(#50 - it has "50" stamped on it) and tighten in place with a 1/2" open end wrench. Replace the
spring. Slide the adjustable shutter back in place.
Adjustable
Shutter
Shutter
Linkage
5 Re-attach the burner pan and burner box front to the burner pan box following the instructions in
step 3 in reverse order.
6 Remove the pilot orifice following the instructions below. Replace with the propane pilot orifice. The propane
conversion kit includes a .016Ó (labeled LP 16) or .011Ó (labeled LP 11) pilot orifice. The .016Ó orifice is
preferred because it allows for larger pilot adjustment.
Remove the pilot
hood assembly by
unscrewing the two
attachment screws.
Phillips
Screwdriver
E
QUIPMENT
a
Push the adjustable shutter to the
left, off the orifice (be careful not
to bend the shutter linkage).
Orifice
d
Use a 1/2Ó open
end wrench to
unscrew the
orifice.
Pilot Hood
Assembly
(C )
ONTINUED
b
Slide the adjustable shutter
down, away from the orifice.
e
Pull the pilot orifice
retainer and pilot orifice
upwards to remove.
c
Remove the spring
f
The new LP orifice has
Ò50Ó stamped on it.
Apply thread
sealant to the
new orifice
prior to
installation.
The old NG orifice has
Ò32Ó stamped on it.
Orifice Identification:
LP (Propane) Orifices
Pilot Orifice
Retainer
L
1 1
P
Pilot Orifice
NG (Natural Gas) Orifices
1 8
N
L
1 6
P
(preferred)
2 1
N
(preferred)