Iberital 2 Groups Instruction And Operation Manual page 6

IBERITAL DE RECAMBIOS, S.A.
The connection to the mains must be carried out using a circuit breaker that conform to the local
safety standards and regulations in force.
9) During the installation the machine must be provided with a suitable automatic circuit breaker
which leaves a gap equal to or greater than 3 mm between its contacts.
10) In order to avoid dangerous overheating make sure that the power cord is completely extended
throughout its length.
11) The power cable must not be replaced by the user, if damage to the cable is noticed, disconnect the
machine from the mains and contact a technically qualified person authorized by IBERITAL.
12) Whenever the machine is not to be used for extended periods make sure it is disconnected from
the mains.
In order to guarantee the continued efficiency of the machine and its correct functioning it is
indispensable that the manufacturer's instructions be followed and the periodic maintenance be carried
out by professionally qualified person.
In particular it is recommended that the safety devices of the machine be periodically
checked.
Do not allow naked hands or other parts of the body to come close to the coffee
dispensing spout or the hot water or steam jets.
The water and steam escaping from the jets is extremely hot and cause burns.
The water jets, steam jets and the filter bowl are extremely hot during normal working
conditions. They must therefore be used with care and only gripped by the handless.
Make sure that the coffee cups are free of water before placing them on the cup
warning shelf.
Only crockery which is specific to this machine should be placed on the cup warning
shelf. In case of doubt, contact your sales center.
The placing of any other objects is therefore to be considered improper and dangerous.
MANUAL NEW IBERITAL INGLES
11/05/2007
Página 4 de 30