Instructions For The Technician; Description Of The Internal Components; Water Connection - Iberital 2 Groups Instruction And Operation Manual

2.- INSTRUCTIONS FOR THE TECHNICIAN

CAUTION: When the cover of the machine is removed in order to repair or push the
reset button, remember to seal another time the two side panels with NSF silicone.

2.1.- DESCRIPTION OF THE INTERNAL COMPONENTS

29) Pump
30) Boiler
2 groups 14 liters
3 groups 20 liters
31) Spring loaded safety valve
32) Pressure eliminating valve (Empty valve)
33) Boiler heating elements
34) Pressure switch
35) Expansion valve
61) Thermostat for the electronic temperature control of the heating element: this thermostat is to
control the temperature inside the boiler. When this temperature is over the correct level the
machine turns off (stop). In order to turn on the machine push the reset button located in this
thermostat (right side of the machine).
62) Boiler water level probe

2.2.- WATER CONNECTION

IMPORTANT: This Equipment is to be installed to comply with the applicable Federal,
State or Local Plumbing codes having jurisdiction.
Página 25 de 30
IBERITAL DE RECAMBIOS, S.A.
MANUAL NEW IBERITALINGLES
11/05/2007