Assembly Instructions - Kenmore 592.30413 Use & Care Manual

HOSE ASSEMBLY
1. Align tabs on end of hose with slots in
edge of hose attachment hole on back
of vacuum. Push hose end in and turn
clockwise to lock into place.
2. Slide the end of the hose wand onto
the hose wand base.
Note : The vacuum will not operate
properly unless the hose wand is
firmly attached.
3. Snap the hose into the hose clip on
the back of the vacuum handle.
1
DJ68-00514A-00.indd 8

ASSEMBLY INSTRUCTIONS

3
2
8
PET HANDIMATE
PLACEMENT
Place the pet handimate on the front of
the handle and push back to snap into
place as shown.
2
1
2009.8.22 9:19:24 AM