Clearing User Id Preferences; Changing A User Id To A Name (M9.35I) - Precor M9.33i Owner's Manual

Clearing User ID Preferences

You can clear all workout preferences for a user ID. Clearing
user preferences restores all programs to their original
programmed profile, resets the workout time, weight and age
preferences to the original defaults, and on the M9.35i,
resets the cumulative workout log to zero.
1. At the Precor banner, select the user ID.
2. Press and hold STOP for about 10 seconds until you see
STATISTICS CLEARED on the display.
Preferences and workout statistics are cleared and
original programs restored.
Note: On the M9.35i, press and hold STOP for another
6 seconds after the STATISTICS CLEARED message
appears to delete the user name.
Owner's Manual: Advanced Programming and Troubleshooting

Changing a User ID to a Name (M9.35i)

When you begin a workout by pressing a user ID, the
treadmill confirms by displaying the user ID in the center
display. On the M9.35i, you may find it helpful to have the
treadmill confirm with a name instead. A user name is limited
to five characters. The name "Frank" is acceptable, but
"Marcia" is not.
1. Select a user ID. Release the key and then press and
hold the number again for 4 seconds. A blinking cursor
appears in the center display indicating your starting
point. If a name appears, the first character is blinking.
The user ID number associated with the user name
appears in the lower display.
2. Use the SPEED arrow keys to scroll through the
alphabet. When the correct character appears, press
INCLINE ▲ to move the cursor right to the next
character.
3. When you are done entering the name, press ENTER.
The name change will be retained in memory even if the
treadmill is turned OFF and unplugged.
4. Press ENTER to continue through the setup prompts or
press STOP to exit to the banner.
51