Table of Contents
Advertisement
Useful Information
Problem
While programming, the
handset starts to ring.
Battery recharge
Problem
I fully charged the battery,
but 7 continues to flash,
or 8 is displayed.
The handset display is
blank.
While charging, the charge
indicator does not light and
"Charge for 7h" is
displayed.
Making/answering calls, intercom
Problem
Static is heard, sound cuts
in and out. Interference
from other electrical units.
The handset does not ring.
The base unit does not
ring.
I cannot make a call.
42
Cause/solution
L A call is being received. Answer the call and
start again after hanging up.
Cause/solution
L Clean the charge contacts and charge again
(page 10).
L The battery may need to be replaced with a new
one (page 10).
L Confirm that the battery is properly installed.
L Fully charge the battery (page 10).
L The battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and "Charging" is displayed.
Cause/solution
L Move the handset and base unit away from
other electrical appliances.
L Move closer to the base unit.
L Turn on the clarity booster feature (page 16).
L Your unit is connected to a telephone line with
ADSL (JetStream) service. We recommend that
you contact your ADSL service provider to have
an ADSL Splitter installed. We do not
recommend the use of generic ADSL filters.
Contact your ADSL provider for details.
L The ringer volume is turned off. Adjust it (page
26).
L The ringer volume is turned off. Adjust it (page
15).
L Another handset is in use. Try again later.
L If the above remedy does not solve the problem,
set the dialling mode. Press {MENU} {0} {5}
{1} {Save} {OFF}.
L The unit is not designed to be used with rotary
(pulse dialling) services.
*1
Advertisement
Table of Contents
