HP NC570C User Manual page 78

Dual-port 4x fabric adapter
Hide thumbs Also See for NC570C:
Table of Contents

Advertisement

66
[root@1750]# /usr/local/topspin/sbin/hca_self_test
---- Performing InfiniBand HCA Self Test ----
Number of HCAs Detected ................ 1
PCI Device Check ....................... PASS
Host Driver Version .................... rhel3-2.4.21-4.ELsmp-2.0.0-530
Host Driver RPM Check .................. PASS
HCA Type of HCA #0 ..................... Cougar
HCA Firmware on HCA #0 ................. v3.01.0000
HCA Firmware Check on HCA #0 ........... PASS
Host Driver Initialization ............. PASS
Number of HCA Ports Active ............. 0
Port State of Port #0 on HCA #0 ........ DOWN
Port State of Port #1 on HCA #0 ........ DOWN
Error Counter Check .................... FAIL
REASON: found errors in the following counters
Errors in /proc/topspin/core/ca1/port1/counters
Symbol error counter:
Kernel Syslog Check .................... PASS
[root@1750]# cat /proc/topspin/core/ca1/port1/counters
Symbol error counter:
Link error recovery counter:
Link downed counter:
Port receive errors:
Port receive remote physical errors:
Port receive switch relay errors:
Port transmit discards:
Port transmit constrain errors:
Port receive constrain errors:
Local link integrity errors:
Excessive buffer overrun errors:
VL15 dropped:
Port transmit data:
Port receive data:
Port transmit packets:
Port receive packets:
Example
Figure 9-4: HCA Self-Test with Errors on Two Ports
5.
To locate further information about an error counter failure, execute counters on a specific port.
Example
Figure 9-5: Example of Error Counter Output
29
29
0
1
0
0
0
2
0
0
0
0
0
1133136
1099008
15738
15264

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nc571c

Table of Contents