HP NC570C User Manual page 29

Note: tsinstall upgrades the firmware on the HCA if it is outdated.
installing 100%
#############################################################################
############
Upgrading HCA 0 to firmware v2.00.0000 build 0
New Node GUID = 0005ad0000001720
New Port1 GUID = 0005ad0000001721
New Port2 GUID = 0005ad0000001722
Programming Tavor Microcode... Flash Image Size = 309760
Failsafe
[===========================================================================]
Erasing
[===========================================================================]
Writing
[===========================================================================]
Verifying
[===========================================================================]
Flash verify passed!
5.
6.
Example
[root@elrond]# rpm -qa | grep topspin
topspin-ib-rh9-1.1.3-687
topspin-ib-mod-rh9-2.4.20-8smp-1.1.3-687
[root@elrond]#
7.
You must reboot the host before using InfiniBand if either of the following scenarios occurred:
• the firmware was upgraded
• you uninstalled, then re-installed the firmware
(Optional) Verify the installation.
Refer to the HP website http://support.hp.com/ for driver updates.
17