Installation And Connections; Parts For Installation And Connections; Installation - Sony XM-S400D Operating Instructions Manual

Installation and Connections

Parts for Installation and
Connections

Main unit

RCA input cord
×1

Bracket
×2

Mounting screw
ø 4 mm × 20 mm
×2
This parts list does not include all the package
contents.

Installation

 Mount the unit on a flat surface.
 Mount the unit where
 The unit will not interfere with the normal
movements of the driver.
 The unit will not be exposed to direct sunlight
or hot air from the heater.

Power connection cable
×1

High level input cord

Bracket screw
ø 2.6 mm × 6 mm
×2
 The unit will not come into contact with a
driver/passengers or materials in your car since
the unit becomes hot during use.
 Do not install the unit under the floor carpet,
where the heat dissipation from the unit will be
considerably impaired.
Mounting the unit
Prepare a mounting board that is thicker than 20
mm since the supplied mounting screws  are all
20 mm long. The unit can also be mounted on the
flat surface of your car without a mounting board.
1
Insert the supplied mounting brackets 
×1
into the slits of the unit and secure them
with the supplied bracket screws .

×1

2
Place the unit on the mounting board
and mark the two screw hole positions.
3
Drill a 3 mm pilot hole at each mark on
the mounting board.


5
GB