Specifications - Sony XM-S400D Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 45 Watts RMS × 4 at
4 Ohms < 1% THD+N
SN Ratio: 83 dBA
(reference: 1 Watt into 4 Ohms)
Circuit system
OTL (output transformerless) circuit,
Pulse power supply
Inputs
RCA pin jacks,
High level input connector
Input level
1 V (RCA pin jacks),
8 V (High level input)
Outputs
Speaker terminals
Speaker impedance
4 Ω – 8 Ω
Maximum output
4 Speakers: 100 W × 4 (at 4 Ω)
Rated output
(supply voltage at 14.4 V, 1 kHz, 1% THD)
4 Speakers: 45 W × 4 (at 4 Ω)
Frequency response
+0.5
20 Hz – 20 kHz (
−3.0
Harmonic distortion
0.08% or less (at 1 kHz, 4 Ω)
Low-pass filter
120 Hz, 12 dB/oct
High-pass filter
120 Hz, 12 dB/oct
Power requirements
12 V DC car battery (negative ground (earth))
Power supply voltage
10.5 V – 16 V
Current drain
At rated output: 15 A (4 Ω, 45 W × 4)
Remote input: 1 mA
dB)
Dimensions
Approx. 162.8 mm × 37.3 mm × 62.6 mm
(w/h/d) not incl. projecting parts and controls
 37.3 mm
 62.6 mm
 31.3 mm
 162.8 mm
 176.8 mm
Mass
Approx. 0.46 kg not incl. accessories
Package contents:
Main unit (1)
Parts for installation and connections (1 set)
Your dealer may not handle some of the above
listed accessories. Please ask the dealer for detailed
information.
Design and specifications are subject to change
without notice.
11
GB