Creating Save To Disk Partition (Or File) - MAXDATA Performance 120T User Manual

Creating the Save To Disk Partition (or File)
The hard drive has a default Save To Disk partition. For example,
Note:
the maximum system memory allowed is 160 MB; 16 MB is
Do not install or
remove the memory
reserved for contents of the video chip and other micro-control-
module when the
lers. Therefore, in order to use this suspend feature under maxi-
system is in the
mum system memory, you would need to increase the Save To
Save To Disk
suspend mode.
Disk partition to 166MB.
Restart the note-
book and power
down before
To resize or create the Save To Disk partition, do the
attempting to
following:
change the memory
configuration.
Warning:
Running the
When using the “Save to partition” mode, you will need to refor-
HDPREPEZ.EXE
mat the hard drive (the DOS partition) and re-install O/S and
program in "save to
partition mode" will
application programs.
corrupt the data in
the HDD. Therefore,
You may create Save To Disk file instead of partition. In this
reinstalling the
software will be
case, you do not need to reformat the hard disk and re-install O/
necessary.
S. To create a Save To Disk file, follow the above procedure and
enter HDPREPEZ .
Section 3 BATTERY POWER & POWER MANAGEMENT
1. Boot up your notebook to DOS.
2. In the Factory CD-ROM (or diskette) locate a utility
program called HDPREPEZ.EXE.
3. Copy all files from this directory to your harddisc.
4. Start HDPREPEZ/C and choose options (“Save to disc”
or “Save to partition” mode. Save this configuration file
5. Type HDPREPEZ at the DOS prompt and press Enter.
3-9