MAXDATA Performance 120T User Manual page 29

The Menu of Advanced CMOS Setup
Advanced CMOS Setup for configuring system options.
Item Selections /
Sub-menu
Disabled
1st Boot
IDE-0
Device
Floppy
CDROM
2nd Boot
Device
3rd Boot
Device
Boot Up On
NumLock
Off
TouchPad Enabled
Support
Disable
Password Setup
Check
Always
LCD Enabled
Expand
Disabled
Share 8 / 16 / 32 MB (or
Memory more)
Size
This notebook employs Share Memory architecture, which means
the graphic engine use a portion of the system memory as display
memory. The more system memory is allocated for display use, the
less memory is available for the system use.
For example, if 8MB out of total system memory of 64MB was set
as VGA shared memory, the system would only show 56MB
during the Power-On Self Test (POST).
Section 2 BIOS SETUP & SECURITY
Description
Set the type of device for the 1st boot
drive that BIOS attempts to boot from after
BIOS POST completes.
Set the type of device for the 2nd boot
drive that BIOS attempts to boot from after
BIOS POST completes.
Set the type of device for the 3rd boot
drive that BIOS attempts to boot from after
BIOS POST completes.
Turn the numeric keys on or off as system
boots up.
Turn on or off TouchPad support
[Setup]:
To enable the password check function
every time when BIOS Setup is executed.
[Always]:
To enable the password check function
every time the system boots.
When enabled, the displaying content is
expanded to fill the entire LCD screen in
DOS mode.
This option allows user to define the
amount of system memory to be used as
display memory or buffer. Share memory
size may be set up to 50% of the total
system memory size.
2-7