The Security Issue By Using Password Protection; The Option Of Auto Dectect Hard Disk; The Option Of Save Settings And Exit - MAXDATA Performance 120T User Manual

USER`S MANUAL

The Security Issue by Using Password Protection

Two Levels of Password Protection
This BIOS provides both a Supervisor and a User password. If
you try to activate both passwords, the Supervisor password
must be set first.
The passwords activate two different levels of protection security:
Have the Password Check item set in Advanced CMOS Setup
Menu (refer to Page 2-10, The Menu of Advanced CMOS Setup).
The passwords are encrypted and stored in NVRAM. If the
password protect is activated, an input 16-character password
prompt appears. Make sure you write it down. If you forget it,
you must have NVRAM erased and reconfigured.
The Option of Auto-Detect Hard Disk
By activation of this option, AMIBIOS will automatically detect the
hard disk drive parameters. The Standard CMOS Setup menu
would display after configuration of the hard drives.
The Option of Defualt Settings
It will automatically set all BIOS Setup options to a complete set
of default settings when you choose this option.

The Option of Save Settings And Exit

When you have completed the system configuration modification,
choose this option to leave BIOS Setup with new parameters
saved and to reboot the computer. So the new system configura-
tion parameters can take effect.
2-12
1. Always requesting password every single time as the
system is powered on.
2. A password checking procedure pops up when BIOS
utility is executed.