Removing Chassis Cover - Gigabyte R180-F34 Service Manual

2-1

Removing Chassis Cover

Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the system cover:
1. Loosen and remove the screws securing the back cover.
2. Push down the indentation located at the side of the back chassis
3. Loosen and remove the thumbscrews.
4. Slide the cover horizontally to the back and remove the cover in the direction of the arrow.
5. Loosen and remove the screws securing the front top cover.
6. Remove the front top cover from the system.
3
1
5
4
- 16 -
2
Hardware Installation