Jumper Setting - Gigabyte R180-F34 Service Manual

4-2

Jumper Setting

No. Jumper Code
CLR_CMOS
1.
(Clearing CMOS Jumper)
S3_MASK (S3 Power
2.
On Select Jumper)
ME_UPDATE
3.
(ME Update Jumper)
PCH_ME
4.
(ME Recovery Jumper)
BIOS_PWD
5. (Clearing Supervisor
Password Jumper)
BIOS_RCVR
6.
(BIOS Recovery Jumper)
BMC_FRB
7.
(Force to Stop FRB
Timer Jumper)
7
6
5
2
4 3
1-2 Close: Normal operation (Default setting)
2-3 Close: Clear CMOS data
1-2 Close: Stop an initial power on when BMC is not ready.
2-3 Close: Keep initial power on. (Default setting)
1-2 Close: Normal operation (Default setting)
2-3 Close: ME recovery mode.
1-2 Close: Normal operation (Default setting)
2-3 Close: ME recovery mode.
1-2 Close: Normal operation. (Default setting)
2-3 Close: Skip supervisor password.
1-2 Close: Normal operation (Default setting)
2-3 Close: BIOS recovery mode.
1-2 Close: Normal operation (Default setting)
2-3 Close: Force to Stop FRB Timer
- 38 -
1
Jumper Setting
Hardware Installation