Sangamo Rstat8 Quick Reference Manual

Download this manual

INSTRUCTIONS: For more detailed information and instructions please refer to

the product User Guide.

Set Time & Date

1. Press CLOCK to enter edit mode

2. Press

3. Press CLOCK to cycle to next option (Month)

4. Repeat steps 2 & 3 to set Month, Day, Hours &

Minutes

5. Press SET to save & exit

Review Program

(view which programs are set over 7 days)

1. Press PROG to enter review mode

2. Pressing PROG again cycles through todays

programs (P1-P6 on right of display)

3. Press

4. Press SET to exit

Programmable Thermostat

Quick Reference Guide

to adjust the Year

to change day (1-7 at top of display)

RSTAT8 & 9

HOLD CLOCK LIGHT

TEST

SET

COPY PROG

RESET

Page 1 INSTRUCTIONS: For more detailed information and instructions please refer to the product User Guide. RSTAT8 & 9 Programmable Thermostat Quick Reference Guide HOLD CLOCK LIGHT COPY PROG TEST RESET Set Time & Date 1. Press CLOCK to enter edit mode 2.
Page 2: Copy Program
HOLD CLOCK LIGHT COPY PROG TEST RESET Adjust Program (change programmed times) 1. Hold SET & press PROG to enter edit mode 2. Use to select day (1-7 at top of display) 3. Press PROG to find setting (cycles P1 time, P1 temperature, P2 time, P2 temperature, ...) 4.
Page 3: Permanent Hold
HOLD CLOCK LIGHT COPY PROG TEST RESET Permanent Hold (temperature is held indefinitely until user cancels) 1. Press HOLD (key icon is displayed) 2. Use to select temperature to hold at 3. Press PROG to confirm 4. Press SET to save & exit (to cancel press SET again, key icon disappears) Hold Days (temperature is held for a number of days before...
Page 4 2. press PROG then SET to confirm 3. Press SET to exit (to cancel hold press SET) If you have a problem or require Sangamo Limited Industrial Estate, Port Glasgow, any further information please Renfrewshire, PA14 5XG contact our technical team on:...

Rstat9