Adjust Program
(change programmed times)
1. Hold SET & press PROG to enter edit mode
2. Use
or
3. Press PROG to find setting (cycles P1 time, P1
temperature, P2 time, P2 temperature, ...)
4. Press
5. Press PROG to find next setting you want to
change and repeat step 4
6. Press SET to save & exit
Copy Program
(copy one whole days settings to other days)
1. Hold COPY for 3 seconds (until display shows
'COPY')
2. Use
or
display, number will flash until a day is copied)
3. Press COPY to copy that days settings
4. Use
or
5. Press COPY to confirm
6. Repeat steps 4 & 5 to copy to subsequent days
7. Press SET to save & exit
_
to select day (1-7 at top of display)
or
to adjust chosen setting
to select day to copy (1-7 at top of
to select day you wish to copy to
HOLD CLOCK LIGHT
TEST
+
SET
COPY PROG
RESET