Maintenance - Hyundai HYT140 User Manual

4.7.4.1.
several passes.
4.7.4.2.
4.7.4.3.
and shaking.
4.7.4.4.
machine to help it to move along.
4.7.4.5.
4.7.4.6.
one to two days to make the soil dry.

5. MAINTENANCE

Do not touch rotating blade.
Stop the engine and unplug the spark plug before doing any repairs or maintenance.
For four stroke engines, check regularly the oil level and add some oil or replace it if
necessary.
Frequently check the tiller and ensure that all deposits are removed from the tilling
blade.
Regularly lubricate the wheel bearings with a suitable lubricant.
For security and condition - Check the blade, in order to obtain a good cut, the blade
should always be sharp and well balanced. At regular intervals, check the tightness of
all nuts, bolts and screws.
If the blade hits an obstacle, stop the tiller, assess for damage. If beyond safe repair
you must replace it.
Refuel in a well-ventilated area with the engine off.
Whilst carrying out maintenance you must wear correct PPE,
suggested PPE but not limited too;
5.1. Cleaning.
5.1.1. Keep the machine clean. Do not use chemical solvent to clean it.
5.1.2. Remove all debris and remnants of other materials from the blades and machine.
For normal operating angle push the handles downwards,
so that the front part of the machine rise 6 to 8".
The required final depth of tilling may only be reached by increasing depth over
During the first pass, the you should keep the depth shallow
If the machine bounces or shakes, you should adjust the speed to reduce bouncing
If the machine does not move forwards, but only digs on the spot, re-balance the
Avoid tilling if the soil is very hard, irrigate it a few days before the cultivation.
Do not work on wet ground. If there has been a heavy rain on the working site, wait
Page 14