Table of Contents
Advertisement
4.7.2.4.
Firstly pull the recoil starter gently, then pull sharply, do not let go of recoil starter
handle, release slowly and repeat until engine starts.
When starting warm engine, turn throttle choke lever to same position as in 4.7.2.3
4.7.2.5.
above.
4.7.2.6.
Pull the recoil starter sharply, do not let go of recoil starter handle, release slowly
and repeat until engine starts.
4.7.2.7.
Once engine is running, adjust throttle to desired speed.
4.7.3. Operation of the clutch.
Before operating the clutch, reduce the speed of the engine.
4.7.3.1.
The clutch connects/dis-connects the engine to the tiller blades.
4.7.3.2.
When the clutch is closed the tillers blades start to turn.
4.7.3.3.
When the clutch is released the tiller blades will come to a stop. The engine
continues to run.
4.7.4. Normal operating angle.
Always wear correct PPE when using this machine.
Recommended PPE but not limited too.
Page 13
Hide quick links:
Advertisement
Table of Contents
