Hyundai HYT140 User Manual page 11

4.4. Drag bar (Rotavating spur) adjustment.
4.4.1. Pull B-shaped clip connecting piece outwards, glide the resistance bar to the depth needed,
reinsert the connecting piece B. The drag bar (Rotavating spur), the device forward motion is
impeded by means of the spur. The desired rotavating depth can be achieved by pushing the
spur into the soils at different levels.
4.5. Angle adjustment.
4.5.1. Loosen the screws of the support bracket of the working arm, choose the angle, and re-
tighten the screws.
4.6. Adjusting the clutch.
Failure to check and make sure correct operation of this safety feature can result in
accidental injury in the case of an emergency.
Page 11