Advertisement
4.
While supporting the baby with one hand, fasten the
other side closure buckle. You will hear a 'click' when
the buckle is secure.
5.
Attach both head support buckles, making sure that the
head support area remains folded down. You will hear a
'click' when the buckle is secure. Adjust the size of the
head support area by pulling both of the head support
straps.
6.
To adjust how high the baby rides on your chest, lift the
baby slightly and pull the shoulder strap adjuster, first on
one strap, then on the other. When the baby is properly
positioned, you should be able to tilt your head forward
and kiss the top of your baby's head.
* The baby should NEVER be leaning forward in the carrier.
* NOTE: The arms of smaller babies should be positioned
below the head support buckles. Larger babies' arms
should be above the buckles, and rest comfortably over the
folded-down head support.
13.
4
Carrier use for an Older Baby:
Backpack Position with Wide Seat - Assisted
Once your baby is fully able to sit up on their own, your child is ready for the
Backpack Position.
* STOP! First time users, DO NOT attempt to use the carrier in the Backpack Position without
the assistance of a second person. We highly recommend always using the assistance of a
second person.
* IMPORTANT! The baby MUST be able to sit up on his or her own before being worn in the
backpack position.
* NOTE: The carrier parts in bold can be found on the carrier illustrations.
1.
To adjust the conversion flaps for the wide seat position,
fold under the corner of the flap and attach the button
hole over the conversion button on the waist belt.
2.
Place your arms through the straps like you are putting on
a jacket. The carrier should be hanging down behind you.
3.
Connect the chest/back buckle. You will hear a 'click'
when the buckle is secure. Pull the strap to tighten.
14.
Advertisement
