Advertisement
4.
With the shoulder straps in place, reach behind your
back to connect the chest/back buckle. If you need
assistance, have another person fasten the buckle.
Pull the strap to tighten.
5.
Fasten the waist belt around your waist and pull the
strap to tighten.
* NOTE: People with longer torsos may find a higher belt
position more comfortable (closer to the navel); shorter
people may wish to wear the belt more on the hips.
6.
Fasten the side closure buckle on one side. You will
hear a 'click' when the buckle is secure. This step will
create a leg opening on the closed side.
7.
With the carrier open on one side and the baby facing
you, carefully slide the baby into the carrier by fitting
his/her leg through the leg opening on the closed side
of the carrier.
* IMPORTANT! Keep one hand on the baby until all buckles
and straps are properly fastened.
* Make sure your baby's leg goes through the leg opening
on the closed side of the carrier.
7.
8.
While supporting the baby with one hand, fasten the
other side closure buckle. You will hear a 'click' when
the buckle is secure.
9.
Support the baby's head by attaching the two head
support buckles above each arm. You will hear a 'click'
when the buckle is secure. Adjust the size of the head
support by pulling both of the head support straps.
* IMPORTANT! Always make sure there is enough room
around your baby's face to provide a clear source of air.
10.
Attach the leg strap to the leg strap button on BOTH
SIDES of the carrier.
* IMPORTANT! For babies between 8-11 lbs, the leg straps
must be attached to make the leg opening smaller and to
avoid a potential falling hazard.
* NOTE: For babies over 11 lbs or 5 kgs, this step is
unnecessary. When leg straps are not in use, fold them
under the tuck-away loops.
8.
Advertisement
