Advertisement
Carrier Body Front:
Refer to these parts when reading the instructions.
Head Support
Head Support Snap
Head Support Snap
Conversion Button
Conversion Flap
for Narrow Seat
Conversion Button
for Narrow Seat
Carrier Body Back:
Chest/Back Buckle
Chest/Back Buckle
Waist Belt & Buckle
Waist Belt & Buckle
Shoulder Straps
Head Support
Shoulder Straps
Head Support Buckle & Strap
Shoulder Strap Adjuster
Conversion Button
for Wide Seat
Conversion Flap
Conversion Button
for Wide Seat
Tuck-Away Loops
Tuck-Away Loops
Tidy Loop
Tidy Loop
5.
1
Carrier use for an Infant:
Facing-In Position with Narrow Seat
This position is for babies 8 lbs to 15 lbs.
* IMPORTANT! Your baby must face toward you until he/she is able to hold their head upright.
* When using this carrier in the Facing-In Position, you should fit it to the user before placing
the baby in the carrier.
* Keep one hand on the baby until all the buckles and straps are properly fastened.
* NOTE: The carrier parts in bold can be found on the carrier illustrations.
Head Support Buckle & Strap
Shoulder Strap Adjuster
1.
Adjust the conversion flaps to the narrow seat position
by folding the flap upward and fastening the button
hole over the conversion button on the front of the
carrier body.
2.
Unfasten the chest/back buckle and waist belt & buckle.
Hold the carrier so the grey interior of the shoulder
straps and waist belt face you. (The straps should form
a "V")
3.
Place your arms through the shoulder straps making
sure the grey fabric rests on your shoulders.
6.
Advertisement
