4.
Fasten the waist belt around your waist and pull the
strap to tighten.
* NOTE: Persons with longer torsos may find a higher belt
position more comfortable (closer to the navel); shorter
people may wish to wear the belt more on the hips.
5.
With assistance from a partner, place the child gently
on your back like you are giving them a piggyback ride.
Your child's legs should wrap around your waist and
their arms should be on your shoulders.
* NOTE: It is helpful to lean forward slightly to help keep the
child in a high position on your back.
* Your child should be supported by a partner at all times.
6.
While the second person is supporting the child, bring
the carrier body up over the child's back.
7.
Once the carrier body is up, the second person will
secure it closed by attaching the side closure buckles
and then the head support buckles. You will hear a 'click'
when secure.
15.
* NOTE: It is helpful to reach around and provide added
support for the child by placing your hand under the child's
bottom while carrier body is being secured.
8.
Once all buckles are fastened, adjust the head support
by pulling the head support straps.
9.
To adjust how high the baby rides on your back, lift the
baby slightly and pull the shoulder strap adjuster, first on
one strap, then on the other.
* NOTE: Wearing the carrier closer to your body and higher
up on your back will minimize stress to your back and
shoulders from prolonged use.
10.
Once all buckles are secured and tightened, the second
person may release their support of the child.
16.
Need help?
Do you have a question about the Fusion and is the answer not in the manual?