Other Operations; Using The Party Chain Function - Sony MHC-GT3D Operating Instructions Manual

1
Press the following button to
select the effect type.

FLANGER: Creates a deep flanging
effect that is similar to the roar of
a jet plane.

ISOLATOR: Isolates a specific
frequency band by adjusting the
other frequency bands. For
example, when you want to focus
on vocals.

SAMPLER: Provides a series of
special sound effects.
2
(For SAMPLER only)
Press SAMPLER repeatedly to
select SAMPLER mode.
3
(For SAMPLER only)
Press S1/S2/S3/S4 to output the
SAMPLER sound effect. To output
other SAMPLER sound effect
continuously, turn the VOLUME/
DJ CONTROL knob.
(For FLANGER and ISOLATOR only)
Turn the VOLUME/DJ CONTROL
knob to adjust the effect level.
To turn off the effect

Press DJ OFF.
 Press the selected effect button
again (for FLANGER and ISOLATOR
only).
Notes

The DJ EFFECT is automatically turned off
when you:
 turn off the system
 change the function
 change the tuner band
 activate or deactivate the PARTY
CHAIN function
 activate the Football mode

If you activate the DJ EFFECT during
transferring, the sound effect will not be
transferred onto the USB device.

You cannot use VOLUME/DJ CONTROL
on the subwoofer to adjust the volume
when the DJ EFFECT is activated.

Press +/– on the remote control to
adjust the volume.
46 GB

Other Operations

Using the Party Chain
function
You can connect multiple audio
systems in a chain to create a more
interesting party environment and to
produce higher sound output.
Activate a system in the chain to be the
"Party Host" and share the music.
Other systems will become "Party
Guest" and play the same music as the
"Party Host".
Setting up the Party Chain
Set up a Party Chain by connecting all
the systems using audio cords (not
supplied).
Before connecting cords, be sure to
disconnect the AC power cord (mains
lead).
 If all the systems are equipped
with Party Chain function
First system
Second
system
Continue the connection
until the last system
Last system