Setting The Audio - Sony MHC-GT3D Operating Instructions Manual

[4:3 PAN SCAN]: Selects this when you
connect a 4:3 screen TV without a wide
mode function. This setting displays a
full-height picture on the entire screen,
with trimmed sides.
[COLOR SYSTEM (VIDEO CD)]
(Except for Latin American, European,
and Russian models)
Selects the color system (PAL or NTSC).
[AUTO]: Outputs the video signal
according to the color system of the
disc. Select this setting if your TV uses
a DUAL system.
[PAL]: Outputs the video signal in PAL.
[NTSC]: Outputs the video signal in
NTSC.
For details, see "Changing the color
system" (page 24).
[BLACK LEVEL]
(For Latin American models only)
Selects the black level (setup level) for
the video signals output from the
VIDEO OUT jack.
[ON]: Sets the black level of the output
signal to the standard level.
[OFF]: Lowers the standard black level.
Use this when the picture becomes too
white.
[PAUSE MODE]
[AUTO]: The picture, including
subjects that move dynamically, is
output with no jitter. Normally select
this setting.
[FRAME]: The picture, including
subjects that do not move
dynamically, is output in high
resolution.
34 GB
[PHOTO EFFECT]
(JPEG files only)
[MODE 1]: The image sweeps in from
top to bottom.
[MODE 2]: The image sweeps in from
left to right.
[MODE 3]: The image stretches out
from the center.
[MODE 4]: The image randomly cycles
through the effects.
[MODE 5]: The next image slides over
the current image.
[OFF]: Off.
[PHOTO INTERVAL]
(JPEG files only)
[NORMAL]/[FAST]/[SLOW 1]/
[SLOW 2]: Selects the slide show
duration. [SLOW 2] is slower than
[SLOW 1].

Setting the audio

options – [AUDIO
SETUP]
[AUDIO DRC]
(Dynamic Range Compression)
Useful for watching movies at low
volume late at night.
[OFF]: Off.
[STANDARD]: The dynamic range is
compressed as intended by the
recording engineer.