NEC univerge sv7000 User Manual page 174

[Directory]
1
Tel #1: 0800XXXXXXX
2
Tel #2:
3
Tel #3:
4
Tel #4:
↓
STEP 8: Select a Category to which the telephone
number belongs.
In this example,
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using
or OK soft key.
1
• Press key, and then press
[Category Set]
1 Company
2
Mobile
3 Voice Mail
4
Home
Others
5
↓
STEP 9: Select either
A maximum of four telephone numbers can be set
1/1
OK
Back
1
Comapny is selected.
, and then press
or OK soft key.
1/1
Back Next
1 2
Disable or Enable.
to an entry. If
phone number which is being edited will be given
top priority. In that case, the telephone number is
automatically selected when the user make a call
without specifying a specific telpehone number.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using
or OK soft key.
1
• Press
key.
[Priority Flag]
1
Disable
2 Enable
STEP 10:The display moves to the Edit screen of Di-
rectory. "7205" has been registered to Tel #2.
See TO EDIT DIRECTORY DATA
Operation, and edit the data as necessary.
169
2
Enable is selected here, the tele-
, and then press
2
or key, and then press
1/1
↓
Prev
OK
in Directory
or OK soft