NEC univerge sv7000 User Manual page 117

Name:
→
STEP 3: Enter a name (in this example, "NEC" is en-
tered) and then press
key. (If no appropriate data exists, the mes-
sage "Entry not found!" appears.)
Name:
NEC
→
If ">>>" soft Key is pressed on the above screen, the fol-
lowing soft keys appear. Pressing
key shifts characters between uppercase and lower-
case.
TIP
<<<
(Upper-case character)
<<<
To delete an entered character, press
TIP
key.
To move the cursor one space to the right, press
TIP
key or "→" soft key once
Clr OK >>>
OK soft
or
(Enter)
Clr OK >>>
or Eu-s/Eu-l soft
(Lower-case character)
Cnl
-Eu-s
Cnl
-Eu-l
or Clr soft
STEP 4: A result of the search is displayed. Press
or UP/DOWN soft key to scroll the result.
Name: NEC
NEC ABIKO
UP
STEP 5: When "NEC BNET" appears, press
,
ter) (Right-cursor)
Name: NEC
NEC BNET
UP
STEP 6: The registered data for "NEC BNET" ap-
pears.
From this screen, you can make a call by go-
ing off-hook or pressing
Name: NEC BNET
Number: XXXXXXXX
More
More soft key appears in Phonebook data screen when
the number of characters (name) or digits (telephone
number) are exceeding displayable limit (Up to 17
TIP
characters or digits can be displayed at a time). If the
name or telephone number exceeds the displayable
limit, press
characters/digits of the name/telephone number.
112
DOWN OK Cnl
or OK soft key.
DOWN OK Cnl
key.
Speaker
Cnl >>>
Prfi
or More soft key to display the last 17
(En-