Installing The Display Assembly; Removing The Solid State Drive (Ssd) - Dell Precision 5510 Owner's Manual

Installing the Display Assembly

1. Place the palm-rest assembly at the edge of the table with the speakers facing away from the edge.
2. Align the screw holes on the palm-rest assembly with the screw holes on the display hinges.
3. Replace the screws that secure the display hinges to the palm-rest assembly.
4. Adhere the tape and route the touch-screen cable through the routing guides on the fan.
5. Connect the touch-screen cable and display cable to the system board.
6. Replace the screw that secures the display-cable bracket to the system board.
7. Follow the procedures in After Working Inside Your Computer.

Removing the Solid State Drive (SSD)

1. Follow the procedures in
2. Remove the:
a. base cover
24
Before Working Inside Your Computer