Installing The Speakers; Removing The Wlan Card - Dell Precision 5510 Owner's Manual

Hide thumbs Also See for Precision 5510:
Table of Contents

Advertisement

Installing the Speakers

1.
Using the alignment posts, place the speakers on the palm-rest assembly.
2.
Replace the screws that secure the speakers to the palm-rest assembly.
3.
Route the speaker cables through the routing guides on the palm-rest assembly.
4.
Connect the speaker cable to the system board.
5.
Install the:
a. battery
b. base cover
6.
Follow the procedures in After Working Inside Your Computer.

Removing the WLAN Card

1.
Follow the procedures in
2.
Remove the:
a.
base cover
b.
battery
3.
Perform the following steps to remove the WLAN card:
a. Remove the screw to release the bracket that secures the WLAN card to the computer [1] and lift
the bracket away from the computer [2].
b. Disconnect the antenna cables from the WLAN card [3].
c. Slide and remove the WLAN card from its connector on the board [4].
Before Working Inside Your
Computer.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents