Installing The Hard Drive; Removing The Speakers - Dell Precision 5510 Owner's Manual

5. Remove the data-cable connector [1] and then slide out the two end brackets [2].

Installing the Hard Drive

1. Replace the hard-drive covers on the hard drive.
2. Connect the hard-drive interposer to the hard-drive assembly.
3. Place the hard-drive assembly on the palm-rest assembly.
4. Connect the hard-drive cable to the system board.
5. Align the screw holes on the hard-drive cage with the screw holes on the hard-drive assembly.
6. Replace the screws that secure the hard-drive cage to the palm-rest assembly.
7. Install the:
a. battery
b. base cover
8. Follow the procedures in After Working Inside Your Computer.

Removing the Speakers

1. Follow the procedures in
2. Remove the:
a. base cover
b. battery
3. Perform the following steps to remove the speaker:
a. Disconnect the speaker cable from the system board [1].
b. Remove the screws that secure the speakers to the computer [2].
c. Lift the speakers, along with the speaker cable, off the computer [3].
12
Before Working Inside Your Computer.