Preparation
Attaching the stand unit
• When installing the stand, you need to put your TV on a flat surface. Before that, put a soft cushion on the surface.
• Before attaching (or detaching) the stand, unplug the AC power cord from the AC power outlet.
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confirm that there are screws with the stand unit.
1
( Four screws)
1 Insert the base into the openings on the bottom of the TV(while holding the base to avoid it from falling over).
2
2 Insert the four screws into the four holes on the back of the TV, and tighten them.
Screws
Soft cushion
NOTE
• To detach the stand unit, perform the steps in reverse order.
• The angle of the stand is not adjustable.
• A screwdriver is not supplied with this product.
• During installation, please be careful to avoid getting your
hand trapped between the TV bottom and the floor.
6
Screwdriver
2
1