Setup; Language ( 語言 ); Digital Setup; Identification - Sharp LC-32M3H Operation Manual

Watching TV

Setup

Setup
Language ( 語言 )
You can also select a language from setup menu.
Select from among 3 languages: English, Simplified
Chinese and Traditional Chinese.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Language( 語言 )", and
3
then press ENTER.
Press a / b to select the desired language
4
listed on the screen.

Digital setup

Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Digital setup", and then
3
press ENTER.
w Digital audio language
Set up to preferred multi audio languages to display if
the audio languages are available.
Press a / b to select "Digital audio language",
1
and then press ENTER.
Press a / b to select "1st language" or "2nd
2
language".
Press c / d to select the desired language.
3
NOTE
• This function depends on audio language information from
broadcasters.
• If audio for the selected language is not included in a received
broadcast, audio will not be output for that language.
20
Language（語言/语言）
Digital setup

Identification

Reset

w Subtitle
Each time you press SUB.T on the remote control, the
subtitle switches when the broadcast contains subtitle
information.
Press a / b to select "Subtitle", and then press
1
ENTER.
Press a / b to select "1st language" or "2nd
2
language".
Press c / d to select the desired language.
3
NOTE
• If subtitles for the selected language are not included in a received
broadcast, subtitles will not be shown for that language.
Identification
You can check the current version of the software on
the screen.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Identification", and then
3
press ENTER.
Reset
If complex adjustments are made and the settings can
not be restored to normal, you can reset the settings
to the factory preset values.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Reset", and then press
3
ENTER.
Press a / b to select "Yes", and then press
4
ENTER.