Sharp LC-32M400M-BK Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. LC-32M400M-BK
  6. Service manual

Sharp LC-32M400M-BK Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TopPage
In the interests of user safety (required by safety regulations in some countries) the set should be restored to its
original condition and only parts identical to those specified should be used.
SAFETY PRECAUTION
CAUTION ............................................... . ............i
MAJOR SERVICE PARTS ..................... . .......... iii
[1]
SPECIFICATIONS ................................. . ....... 1-1
[1]
OPERATION MANUAL .......................... . ....... 2-1
[1]
DIMENSIONS ........................................ . ....... 3-1
[1]
REMOVING OF MAJOR PARTS ........... . ....... 4-1
CHAPTER 5. ADJUSTMENT
[1]
ADJUSTMENT PROCEDURE ............... . ....... 5-1
[2]
USB Clone (Smart Loader) .................... . ....... 5-6
[3]
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
SERVICE MANUAL
LCD COLOUR TELEVISION
LC-32M400M-BK
LC-32M400M-WH
LC-32M400M-RD
MODELS
CONTENTS
[1]
[1]
[2]
[1]
[2]
[3]
[1]
[2]
[3]
[4]
LC-32M400M-BK/WH/RD
No. S51Q1LC32M40M
TROUBLESHOOTING TABLE ......................6-1
OVERALL WIRING DIAGRAM ......................7-1
SYSTEM BLOCK DIAGRAM .........................7-2
MAIN Unit ......................................................8-1
IR OPC Unit...................................................8-4
TERMINAL Unit .............................................8-5
GRAM............................................................9-1
MAIN Unit ......................................................9-2
IR OPC Unit.................................................9-13
TERMINAL Unit ...........................................9-14
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC-32M400M-BK and is the answer not in the manual?

Questions and answers

Related Manuals for Sharp LC-32M400M-BK

Summary of Contents for Sharp LC-32M400M-BK

  • Page 1: Table Of Contents

    TopPage LC-32M400M-BK/WH/RD SERVICE MANUAL No. S51Q1LC32M40M LCD COLOUR TELEVISION LC-32M400M-BK LC-32M400M-WH LC-32M400M-RD MODELS In the interests of user safety (required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.

  • Page 2: Important Service Safety Pre

    LC-32M400M-BK/WH/RD LC32M400MBK SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING All checks must be repeated with the AC cord plug connection reversed.

  • Page 3: Precautions For Using Lead-Free Solder

    LC-32M400M-BK/WH/RD PRECAUTIONS FOR USING LEAD-FREE SOLDER Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.

  • Page 4: Outline

    LC-32M400M-BK/WH/RD LC32M400MBK OUTLINE Service Manual MAJOR SERVICE PARTS PWB UNIT Ref No. Part No. Description DKEYMF878FM01 MAIN Unit (Except for Philippines) DKEYMF878FM02 MAIN Unit (for Philippines) DUNTKF879WE01 IR/OPC Unit DUNTKF885FM01 TERMINAL Unit RDENCA438WJPZ POWER Unit RUNTKA860WJPZ INVERTER Unit OTHER UNIT Ref No.

  • Page 5: Chapter 1. Specifications

    Operating Temperature 0°C — 40°C • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.

  • Page 6: Chapter 2. Operation Manual

    LC-32M400M-BK/WH/RD CHAPTER 2. LC32M400MBK OPERATION MANUAL Service Manual [1] OPERATION MANUAL Part names TV (Front) Remote control sensor OPC sensor POWER indicator Light off Power off Lighted (Red) The TV is in standby mode. Lighted (Green) The TV is on.
  • Page 7 LC-32M400M-BK/WH/RD Remote control unit 6 FREEZE Freeze a motion picture on the screen. 7 EXIT Return to the default screen. 8 Colour (Red/Green/Yellow/Blue) TELETEXT mode: Select a page. 9 POWER (STANDBY/ON) To switch the power on and off. 10 DISPLAY Display the channel or input information.
  • Page 8 LC-32M400M-BK/WH/RD PC Control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
  • Page 9 LC-32M400M-BK/WH/RD RS-232C commands list Commands • Commands not indicated here are not guaranteed to operate. SURROUND SURROUND TOGGLE SURROUND ON SURROUND OFF NOTE • If an underbar (_) appears in the parameter column, enter a space. • If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

  • Page 10: Chapter 3. Dimensions Dimensions

    LC-32M400M-BK/WH/RD CHAPTER 3. LC32M400MBK DIMENSIONS Service Manual [1] DIMENSIONS Unit: mm 99.2 792.2 699.2 86.3 113.3 241.6 3 – 1...

  • Page 11: Chapter 4. Removing Of Major Parts

    LC-32M400M-BK/WH/RD CHAPTER 4. LC32M400MBK REMOVING OF MAJOR PARTS Service Manual [1] REMOVING OF MAJOR PARTS 1. Removing of the Stand Unit and Rear Cabinet 1. Remove the 4 lock screws [1] and detach the Stand Unit [2]. 2. Remove the 2 lock screws [3], 2 lock screw [4], 8 lock screw [5] and detach the Rear Cabinet Ass’y [6].
  • Page 12 LC-32M400M-BK/WH/RD 2. Disconnect the connectors 1. Disconnect the connectors from the MAIN Unit, IR/OPC Unit, POWER, Unit, TERMINAL Unit, INVERTER Unit and LCD Panel Module [1]. LCD Panel Module POWER Unit MAIN Unit LVDS LVDS VA/VB VA/VB MA MB MA MB...
  • Page 13 LC-32M400M-BK/WH/RD 3. Removing of the Side AV Cover Ass’y, Speaker-L/R and Bottom Bracket 1. Remove the 2 lock screws [1], and detach the Side AV Cover Ass’y [2]. 2. Remove the 2 lock screws [3], 4 lock screws [4] and detach the Bottom Bracket [5].
  • Page 14 LC-32M400M-BK/WH/RD 4. Removing of the PWB Units 1. Detach the IR/OPC Unit [1]. 2. Remove the 4 lock screws [2] and detach the TERMINAL Unit [3]. 3. Remove the 4 lock screws [4] and detach the MAIN Unit [5]. 4. Remove the 6 lock screws [6] and detach the POWER Unit [7].
  • Page 15 LC-32M400M-BK/WH/RD 5. Removing of the LCD Panel Module 1. Remove the 4 lock screws [1] and detach VESA Angle [2]. 2. Remove the 2 lock screws [3], 2 lock screws [4]. 3. Detach the 6 pieces claws and detach the LCD Panel Module [5] from the Front Cabinet [6].

  • Page 16: Adjustment Procedure

    LC-32M400M-BK/WH/RD CHAPTER 5. LC32M400MBK ADJUSTMENT Service Manual [1] ADJUSTMENT PROCEDURE 1. Entering and cancel the adjustment process mode 1) While holding down the TV/VIDEO and Volume DOWN keys at the same time, plug in the AC cord to turn on the power. (“K” standing for inspec- tion process mode is displayed on the upper left position of the screen.)
  • Page 17 LC-32M400M-BK/WH/RD 6) Let the process running & entering verification. Verifying Verified 7) Software is successfully installed when the following appears at the end of the process. Please re-boot the system Update Finished 8) Plug off the LCD TV and plug ON again as usual.
  • Page 18 LC-32M400M-BK/WH/RD 4.1.2 Component 15K 50Hz signal adjustment (COMP-SD) Adjustment item Adjustment conditions Adjustment procedure Adjustment [Signal] Feed the COMPONENT 15K 50Hz (576i) 100% Full-field Colour Bar signal (100% colour COMP 15K 50Hz (576i) saturation) to INPUT 6 COMPONENT terminal. 100% Full-field Colour Bar...
  • Page 19 LC-32M400M-BK/WH/RD 4.2. White balance adjustment Adjustment item Adjustment conditions Adjustment procedure Adjustment Brightness : MAX For the details of white balance adjustment procedure, please refer to white balance adjustment spec for current model. Set the luminance meter on the center of the screen 1) Confirm the set condition.
  • Page 20 LC-32M400M-BK/WH/RD 5. Factory setting AC power is plug off after shipment setting is done. CAUTION: Do not plug on again after shipment setting is done. If do, please re-do the shipment setting. Do not off with remote control. Adjustment item...

  • Page 21: Usb Clone (Smart Loader)

    LC-32M400M-BK/WH/RD [2] USB Clone (Smart Loader) 1. Description The Smart Loader is a function implemented in the service software to easily replicate the user settings of one TV into another. These settings include (but not restricted to): picture and audio, turning set-up, language and country selection, PIN, child locked programs etc.

  • Page 22: Public Mode Setting Procedure

    LC-32M400M-BK/WH/RD [3] PUBLIC MODE SETTING PROCEDURE 1. How to start Public Mode • There are the following two ways to get the public mode setup screen displayed. 1) Press the “TV/VIDEO” and “VOL (+)” keys on the set at once and turn on the power.
  • Page 23 LC-32M400M-BK/WH/RD 4. Public Mode Menu The guidance is not displayed onscreen. Setup procedure • To move the cursor up and down, use the “cursor UP/DOWN” key (remote controller) and “CH ( )” key (remote controller and set). • To change the settings, use the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+)/(–)” key (remote controller and set).
  • Page 24 LC-32M400M-BK/WH/RD 3. VOLUME FIXED Selection Selection between “Variable” and “Fixed” (loop provided) Default Variable Explanation Sound volume is fixed and made invariable. Limit in setting • The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the setting is made impossible.
  • Page 25 LC-32M400M-BK/WH/RD 8. ON SCREEN DISPLAY Selection Selection between “Yes”, “No” (loop provide) Default Explanation The following OSD displays are made ineffective. Displays of menu group, channel call, sound volume bar and direct key call Limit in setting • Set time of the OFF-timer (SLEEP TIMER) is cleared.
  • Page 26 LC-32M400M-BK/WH/RD 13.RC PATH THROUGH Selection “Off”, “On: TV RCE”, “On: TV RCD” Default Explanation Remote control signal output from the pin 9 of the RS-232C terminal and signal reception is enabled or disabled. When set to “ON: TV RCE”, TV also receives signals. With “ON: TV RCD”, the remote control signal is output from the pin 9, but TV does not respond to the remote control.

  • Page 27: Chapter 6. Troubleshooting Table Troubleshooting Table

    LC-32M400M-BK/WH/RD CHAPTER 6. LC32M400MBK TROUBLESHOOTING TABLE Service Manual [1] TROUBLESHOOTING TABLE No power (front LED failure to light up) or no startup (front LED failure to turn from red to green) Is the AC cord connector tightly connected to the set? Reconnect the AC cord tightly and turn on the power again.
  • Page 28 LC-32M400M-BK/WH/RD With [RF] signal input No video onscreen (1) No video in the UHF/VHF reception Is there IF output from the tuner pin(10) of TU1101 as specified? Check TU1101 and its peripheral circuits. Is there VIF input at pin 56 & 57 of IC3301? Check the circuit between TU1101 &...
  • Page 29 LC-32M400M-BK/WH/RD With <Video> signal input No video onscreen (3) No external input video onscreen <INPUT 5> Is INPUT 5 selected on the input select menu screen? Select INPUT 5 on the input select menu screen to pick up the right input signal.
  • Page 30 LC-32M400M-BK/WH/RD With <Component> signal input No video onscreen (5) No external input video onscreen <INPUT 6> Is INPUT 6 selected on the input select menu screen? Select INPUT 6 on the input select menu screen to pick up the right input signal.
  • Page 31 LC-32M400M-BK/WH/RD No audio heard (1) No sound in the UHF/VHF reception. Is the IF output from the tuner pin (10) of TU1101 as specified? Check TU1101 and its peripheral circuits. Is there the I2S signal input at pins (180), (181) of IC3301? Check IC3301 and its peripheral circuits.
  • Page 32 LC-32M400M-BK/WH/RD No audio heard (2) No external audio heard <INPUT 4> Is there the L-ch audio signal input from pin (8) of input terminal SC5201 to pin (77) of IC3301? Is there the R-ch audio signal input from pin (9) of input terminal SC5201 to pin (78) of IC3301? <INPUT 5>...
  • Page 33 LC-32M400M-BK/WH/RD No audio heard (3) No HDMI sound heard. <INPUT 1>, <INPUT 2>, <INPUT 3> (*INPUT 1 is digital audio.) Does the HDMI image appear onscreen? Refer to “<INPUT 1> in No external input video onscreen (HDMI)”. No audio output from <INPUT 1>, <INPUT 2>, <INPUT 3>.
  • Page 34 LC-32M400M-BK/WH/RD No audio heard (4) No sound from the HDMI sound input terminal. (INPUT 1 analog audio) Is there the L-ch audio signal input from pin (2) of external input terminal J506 (HDMI AUDIO IN) to pin (70) of IC3301?
  • Page 35 LC-32M400M-BK/WH/RD No audio heard (5) No PC audio output Pin (2) of J506: Is L-ch input into the pin (70) of IC3301? Pin (3) of J506: Is R-ch input into the pin (71) of IC3301? Are I2S signal output from the pins (180), (181) of IC3301 normally? Check peripheral circuits of IC3301.
  • Page 36 LC-32M400M-BK/WH/RD - MEMO - 6 – 10...

  • Page 37: Chapter 7. Overall Wiring/Block Diagram

    LC-32M400M-BK/WH/RD LC32M400MBK CHAPTER 7. OVERALL WIRING/BLOCK DIAGRAM Service Manual [1] OVERALL WIRING DIAGRAM 7 – 1...

  • Page 38: System Block Diagram

    LC-32M400M-BK/WH/RD [2] SYSTEM BLOCK DIAGRAM IR PASS THROUGH PIN 9 7 – 2...

  • Page 39: Chapter 8. Printed Wiring Board Assemblies

    LC-32M400M-BK/WH/RD LC32M400MBK CHAPTER 8. PRINTED WIRING BOARD ASSEMBLIES Service Manual [1] MAIN Unit MAIN Unit (Side-A) 8 – 1...
  • Page 40 LC-32M400M-BK/WH/RD MAIN Unit (Chip Parts Side-A) 8 – 2...
  • Page 41 LC-32M400M-BK/WH/RD MAIN Unit (Side-B) 8 – 3...

  • Page 42: Ir Opc Unit

    LC-32M400M-BK/WH/RD [2] IR OPC Unit I/R OPC Unit (Side-A) I/R OPC Unit (Chip Parts Side-A) I/R OPC Unit (Side-B) 8 – 4...

  • Page 43: Terminal Unit

    LC-32M400M-BK/WH/RD [3] TERMINAL Unit Terminal Unit 8 – 5...
  • Page 44 LC-32M400M-BK/WH/RD Terminal Unit (Chip Parts) 8 – 6...

  • Page 45: Chapter 9. Schematic Diagram

    LC-32M400M-BK/WH/RD LC32M400MBK CHAPTER 9. SCHEMATIC DIAGRAM Service Manual [1] DESCRIPTION OF SCHEMATIC DIAGRAM 1. VOLTAGE MEASUREMENT CONDITION: 1) The voltages at test points are measured on exclusive AC adaptor and the stable supply voltage of AC 110-240V. Signals are fed by a color bar signal gen- erator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.

  • Page 46: Main Unit

    LC-32M400M-BK/WH/RD [2] MAIN Unit • MAIN Unit-1/11 9 – 2...
  • Page 47 LC-32M400M-BK/WH/RD • MAIN Unit-2/11 9 – 3...
  • Page 48 LC-32M400M-BK/WH/RD • MAIN Unit-3/11 9 – 4...
  • Page 49 LC-32M400M-BK/WH/RD • MAIN Unit-4/11 9 – 5...
  • Page 50 LC-32M400M-BK/WH/RD • MAIN Unit-5/11 9 – 6...
  • Page 51 LC-32M400M-BK/WH/RD • MAIN Unit-6/11 9 – 7...
  • Page 52 LC-32M400M-BK/WH/RD • MAIN Unit-7/11 9 – 8...
  • Page 53 LC-32M400M-BK/WH/RD • MAIN Unit-8/11 9 – 9...
  • Page 54 LC-32M400M-BK/WH/RD • MAIN Unit-9/11 9 – 10...
  • Page 55 LC-32M400M-BK/WH/RD • MAIN Unit-10/11 9 – 11...
  • Page 56 LC-32M400M-BK/WH/RD • MAIN Unit-11/11 9 – 12...

  • Page 57: Ir Opc Unit

    LC-32M400M-BK/WH/RD [3] IR OPC Unit 9 – 13...

  • Page 58: Terminal Unit

    LC-32M400M-BK/WH/RD [4] TERMINAL Unit • TERMINAL Unit 1 9 – 14...
  • Page 59 LC-32M400M-BK/WH/RD • TERMINAL Unit 2 9 – 15...
  • Page 60 LC-32M400M-BK/WH/RD • TERMINAL Unit 3 9 – 16...

  • Page 61: Parts Guide

    LC-32M400M-BK/WH/RD PartsGuide PARTS GUIDE No. S51Q1LC32M40M LCD COLOUR TELEVISION LC-32M400M-BK LC-32M400M-WH LC-32M400M-RD MODELS Note: The reference numbers on the PWB are arranged in alphabetical order. CONTENTS PRINTED WIRING BOARD CABINET AND MECHANICAL ASSEMBLIES PARTS LCD PANEL SUPPLIED ACCESSORIES DKEYMF878FM01/FM02 (MAIN...
  • Page 62 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [1] PRINTED WIRING BOARD ASSEMBLIES MAIN Unit (Except for Philippines) DKEYMF878FM01 MAIN Unit (for Philippines) DKEYMF878FM02 IR/OPC Unit DUNTKF879WE01 TERMINAL Unit DUNTKF885FM01 POWER Unit RDENCA438WJPZ RUNTKA860WJPZ INVERTER Unit [2] LCD PANEL 32"...
  • Page 63 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [3] DKEYMF878FM01/FM02 (MAIN Unit) C2724 Capacitor RC-KZA621WJQZY C2725 Capacitor 0.1 25V Ceramic VCKYCZ1EF104ZY C2726 Capacitor 0.1 25V Ceramic VCKYCZ1EF104ZY C2727 Capacitor 0.1 25V Ceramic VCKYCZ1EF104ZY C2728 Capacitor 0.1 25V Ceramic VCKYCZ1EF104ZY...
  • Page 64 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [3] DKEYMF878FM01/FM02 (MAIN Unit) C3366 Capacitor 0.1 10V Ceramic VCKYCZ1AB104KY C3367 Capacitor 0.1 10V Ceramic VCKYCZ1AB104KY C3368 Capacitor 0.1 10V Ceramic VCKYCZ1AB104KY C3369 Capacitor 0.1 10V Ceramic VCKYCZ1AB104KY C3370 Capacitor RC-KZA621WJQZY...
  • Page 65 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [3] DKEYMF878FM01/FM02 (MAIN Unit) IC1502 IC HDMI 3 EDID RH-IXD189WJQZS IC1503 IC HDMI 2 EDID RH-IXD188WJQZS IC1551 IC BU16028KV VHIBU16028K-1Q IC2701 IC YDA148-QZE2 VHIYDA148QZ-1Y IC2702 VHIDRV612++-1Y IC3301 RH-IXD018WJZZQ IC MST9A884JL-LF IC3302...
  • Page 66 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [3] DKEYMF878FM01/FM02 (MAIN Unit) R1117 Resistor 68 1/16W Metal Oxide VRS-CZ1JF680JY R1118 Resistor 680 1/16W Metal Oxide VRS-CZ1JF681JY R1119 Resistor 0 1/16W Metal Oxide VRS-CZ1JF000JY R1125 Resistor 0 1/16W Metal Oxide...
  • Page 67 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [3] DKEYMF878FM01/FM02 (MAIN Unit) R3317 Resistor 47 1/16W Metal Oxide VRS-CZ1JF470JY R3318 Resistor 470 1/16W Metal Oxide VRS-CZ1JF471JY R3319 Resistor 1k 1/16W Metal Oxide VRS-CZ1JF102JY R3320 Resistor 1k 1/16W Metal Oxide...
  • Page 68 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [3] DKEYMF878FM01/FM02 (MAIN Unit) R9624 Resistor 47k 1/16W Metal Oxide VRS-CZ1JF473FY R9625 Resistor 3.9k 1/16W Metal Oxide VRS-CZ1JF392FY R9627 Resistor 5.6k 1/16W Metal Oxide VRS-CZ1JF562JY R9628 Resistor 0 1/16W Metal Oxide...
  • Page 69 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [5] DUNTKF885FM01 (TERMINAL Unit) R5417 Resistor 0 1/4W Metal Oxide VRS-TQ2EF000JY R5418 Resistor 0 1/4W Metal Oxide VRS-TQ2EF000JY R5501 Resistor 0 1/16W Metal Oxide VRS-CY1JF000JY R5502 Resistor 75 1/4W Metal Oxide...
  • Page 70 LC-32M400M-BK/WH/RD [6] CABINET AND MECHANICAL PARTS IR/OPC Unit MAIN Unit TERMINAL Unit POWER Unit LCD Panel Module Unit...
  • Page 71 LC-32M400M-BK/WH/RD PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [6] CABINET AND MECHANICAL PARTS Front Cabinet Ass'y (32M400M-BK) CCABAC763WJ01 Front Cabinet Ass'y (32M400M-WH) CCABAC763WJ02 Front Cabinet Ass'y (32M400M-RD) CCABAC763WJ03 Front Cabinet Not Available LED Cover Not Available Shine Trim Not Available...
  • Page 72 LC-32M400M-BK/WH/RD [7] SUPPLIED ACCESSORIES Remote control unit “AA” size alkaline battery ( x 1) Operation manual Stand base ass'y Screws ( x 4) Antenna adapter PRICE PARTS CODE DESCRIPTION PART RANK MARK DELIVERY [7] SUPPLIED ACCESSORIES Remote Control Unit RRMCGA976WJSA "AA"...
  • Page 73 LC-32M400M-BK/WH/RD [8] PACKING PARTS (NOT REPLACEMENT ITEM) PRICE PARTS CODE DESCRIPTION PART RANK MARK DELIVERY [8] PACKING PARTS (NOT REPLACEMENT ITEM) Packing Case (32M400M-BK except Indonesia) SPAKCG325WJZZ Packing Case (32M400M-BK for Indonesia) SPAKCG364WJZZ SPAKCG366WJZZ Packing Case (32M400M-WH except Indonesia) Packing Case (32M400M-WH for Indonesia)
  • Page 74 LC-32M400M-BK/WH/RD PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [9] SERVICE JIGS (USE FOR SERVICING) QCNW-M159WJPZ TERMINAL-LCD Control (RA) QCNW-M160WJPZ MAIN-POWER (PI) QCNW-M161WJPZ MAIN-Speaker (SP) QCNW-M162WJPZ MAIN-LCD Control (LW) QCNW-M165WJPZ POWER-INVERTER (VA/VB), x2...
  • Page 75 LC-32M400M-BK/WH/RD...
  • Page 76 LC-32M400M-BK/WH/RD © COPYRIGHT 2011 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-32m400m-whLc-32m400m-rd

Table of Contents

Save PDF