Watching TV
Programme setup
Programme setup
Auto installation
You can run auto installation again, even after setting
up the preset channels.
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup" .
2
Press a / b to select "Auto installation", and
3
then press ENTER.
Press a / b to select the desired language,
4
and then press ENTER.
Press a / b to select "DTV"、 "ATV" or
5
"DTV + ATV" and then press ENTER.
The TV searches for, sorts and stores all the
6
receivable TV stations according to their settings and
the connected antenna.
• To abort the initial auto installation in progress,
press MENU.
Digital setting
You can set some DTV channel items manually.
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup".
2
Press a / b to select "Digital setting", and then
3
press ENTER.
Press a / b to select the desired menu item,
4
and then press ENTER.
w Auto search
Use this menu to add new DTV services automatically
after auto installation has been completed.
w Manual search
Add new services within a specified frequency band.
Auto installation
Digital setting
Analogue setting
Programme edit
w Signal information
See page 14 for signal information.
Analogue setting
You can set some ATV channel items manually.
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup".
2
Press a / b to select "Analogue setting", and
3
then press ENTER.
Press a / b to select the desired menu item,
4
and then press ENTER.
w Auto search
Use this menu to add new ATV services automatically
after auto installation has been completed.
w Manual adjust
Press a / b to select your desired item, and then press
c / d to adjust the settings.
Item
Storage to
Save programme to your desired
[1~99]
channel number. Press R to save.
Sound system
Select the optimum sound system
(Broadcasting system) to receive.
(B/G, D/K, I, M)
Press R to save.
Colour system
Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Press R to save.
Current CH
Select the channel you want to edit.
• Selected channel will be automatically
refl ected in the background.
Search
Start searching from current channel.
• Instead of pressing
frequency, you can set by directly
entering the frequency number of the
channel with 0 — 9, and then press ENTER.
Press R to save.
Fine-tune
Tune the frequency of the stored channel
to your desired position.
• Adjust while checking the background
picture as a reference.
Press R to save.
NOTE
• The frequency shown below the On-Screen Display shows
the real-time frequency of the displayed channel.
Description
c / d
to adjust the
15