Wide Mode - Sharp LC-32M3H Operation Manual

Watching TV

Wide mode

You can select different picture sizes that account for
the kind of each picture.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Wide mode", and then
3
press ENTER.
Or you can press WIDE on the remote control
unit.
• The "Wide mode" menu displays.
• The menu lists the wide mode options selectable
for the type of TV/video signal currently received.
Press WIDE or a / b while the "Wide mode"
4
menu displays on the screen.
• As you toggle down the options, each mode is
immediately reflected on the TV.
Selected item
Normal For 4:3 standard pictures. A side bar appears
on each side.
Zoom 14:9 For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also
see bars on the top and bottom with some
programmes.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
Full For 16:9 squeeze pictures.
Cinema 16:9 For 16:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
Cinema 14:9 For 14:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
Dot by Dot Display an image with the same number of
pixels on the screen (only when receiving 1080i
/ 1080p signal and applied to LC-40M3H only.)
Underscan Display with an Underscan image only when
LC-32M3H receiving 720p/1080i/1080p
signal / LC-40M3H receiving a 720p signal.
Display with the High-Definition image adjusted
optimally. Noise may appear on the edge of the
screen with some programmes.
Normal Zoom 14:9
Cinema 14:9 Cinema 16:9
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
18
Description
Panorama
Full
Reset
Reset all picture adjustment items to the factory preset
values.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Reset", and then press
3
ENTER.
Press a / b to select "Yes", and then press
4
ENTER.