Pioneer CDJ-1000MK2 Service Manual page 73

5
@ Mode for checking the error log
If any abnormality occurs in normal use, the following error numbers are displayed in the display block.
• How to check the error log
Error Check Mode : ON
POWER SW
POWER ON
FL display
• If a JOG dial is rotated on the right, it will become error display mode.
FL display
• By entering this mode, the latest 16 errors can be checked.
In this mode, an error breakdown code is displayed in the minute display block, and the address where that error breakdown
code is stored in the memory of the microcomputer is displayed in the second and frame display block (in hexadecimal
notation).
The error breakdown code of the latest error is stored at address FFDF20, and that of the oldest error is stored at address
FFDF2F. You can change the address by turning the Jog dial from FFDF20 to FFDF2F (initial value: FFDF20).
Error No. Error Name
E-6001 FPGA PROGRAM
DOWNLOAD ERROR
E-6002 DSP PROGRAM
DOWNLOAD ERROR
E-7201 TOC READ ERROR
E-8301 PLAYER ERROR
(startup problem)
E-8302 PLAYER ERROR
(playback problem)
E-8303 PLAYER ERROR
(problem in writing in the buffer)
E-9101 MECHANICAL TIME OUT
* If this error occurs before the inserted disc is recognized as a CD, the disc is automatically ejected. In this case, the error
code No. is not displayed, but you can see the error breakdown code stored in memory. Only in the case of breakdown
code 20 (the spindle motor does not rotate), the disc will not be ejected, because this is not a problem of the media.
Error Check Mode : CANCEL
POWER OFF
5
6
RELOOP/EXIT
Hold it pressed for 10 seconds.
address
61: The program cannot be written in the FPGA.
62: The program cannot be written in the DSP.
26: The TOC data cannot be read.
11: Any error occurring before disc recognition and leading to operation stop
is categorized as this error.*
20: The spindle motor does not rotate.*
21: No disc (focus error level: low)*
24: The address cannot be read.*
12: Your desired address cannot be searched.
15: The address cannot be read.
22: The focus servo cannot close.
23: The tracking servo cannot close.
99: Problem in writing in the buffer
90: Abnormality in the disc-loading mechanism (timeout)
CDJ-1000MK2
6
7
Error Breakdown
Error Breakdown
7
8
A
B
C
D
E
F
73
8