Keyless Entry - Ford Taurus 2016 Owner's Manual

Hide thumbs Also See for Taurus 2016:
Table of Contents

Advertisement

The lamps will turn off if all the doors
remain closed and:
25 seconds have elapsed.
You lock your vehicle from the outside.
Battery Saver
If you leave the courtesy lamps, interior
lamps or headlamps on, the battery saver
shuts them off 10 minutes after you switch
the ignition off.
Battery Saver for Intelligent Access
Keys (If Equipped)
If you leave the ignition switched on and
the engine is not running, the battery saver
will turn the ignition off when it detects a
certain amount of battery drain, or after
45 minutes have elapsed.

KEYLESS ENTRY

SECURICODE
Keypad
The keypad is near the driver window. It
illuminates when touched.
Note: If you enter your entry code too fast
on the keypad, the unlock function may not
work. Enter your entry code again more
slowly.
Taurus (CPH) Canada/United States of America, enUSA, First Printing
Locks
Keyless Entry
E138637
You can use the keypad to do the
following:
Lock or unlock the doors.
Program and erase user codes.
Arm and disarm the anti-theft alarm.
Recall memory seat and mirror
positions.
You can operate the keypad with the
factory-set five-digit entry code. The code
is on the owner's wallet card in the glove
box and is available from an authorized
dealer. You can also program up to five of
your own five-digit personal entry codes.
Programming a Personal Entry Code
1.
Enter the factory-set five-digit code.
2. Press 1·2 on the keypad within five
seconds.
3. Enter your personal five-digit code.
You must press each number within
five seconds of each other.
4. Press 1·2 on the keypad to save
personal code 1.
The doors lock then unlock to confirm that
programming was successful.
58

Advertisement

Table of Contents
loading

Table of Contents