Table of Contents
Advertisement
Rear seat non-adjustable outboard
head restraints
A
E162872
A
An energy absorbing head
restraint.
B
Two steel stems.
C
Guide sleeve unlock and remove
button.
Removing the Head Restraint
1.
Pull the head restraint up until it
reaches its highest position.
2. Press and hold both C buttons.
3. Pull the head restraint up.
Installing the Head Restraint
Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.
Tilting Head Restraints
The front head restraints tilt for extra
comfort. To tilt the head restraint, do the
following:
Taurus (CPH) Canada/United States of America, enUSA, First Printing
Seats
B
C
E144727
1.
2. Pivot the head restraint forward toward
After the head restraint reaches the
forward-most tilt position, pivoting it
forward again will then release it to the
rearward, untilted position.
MANUAL SEATS
Moving the Seat Backward and
Forward
(If Equipped)
118
Adjust the seatback to an upright
driving or riding position.
your head to the desired position.
WARNINGS
Do not adjust the driver seat or
seatback when your vehicle is
moving.
Rock the seat backward and forward
after releasing the lever to make sure
that it is fully engaged.
(If Equipped)
Advertisement
Table of Contents
Troubleshooting
