Ford Taurus 2016 Owner's Manual page 294

6. Remove the second wing nut that
secures the jack retention bracket by
turning it counterclockwise, then
remove the jack kit from your vehicle.
7. Remove the jack and the wrench from
the felt bag. Fold down the wrench
socket used to loosen the lug nuts and
to operate the jack.
8. Loosen each wheel lug nut one-half
turn counterclockwise, but do not
remove them until the wheel is raised
off the ground.
E145908
9. The vehicle jacking points are shown
here, and are depicted on the warning
label on the jack. Small arrow-shaped
marks on the sills show the location of
the jacking points.
E201156
10. Raise the wheel by turning the jack
handle clockwise.
11. Remove the lug nuts with the lug
wrench.
Taurus (CPH) Canada/United States of America, enUSA, First Printing
Wheels and Tires
12.
13.
E75442
14.
Stowing the jack and flat tire
1.
291
Replace the flat tire with the spare
tire, making sure the valve stem is
facing outward. Reinstall the lug nuts
until the wheel is snug against the
hub. Do not fully tighten the lug nuts
until the wheel has been lowered.
Lower the wheel by turning the jack
handle counterclockwise.
1
3
5
Remove the jack and fully tighten the
lug nuts in the order shown. See
Technical Specifications (page
293).
Remove the extension bolt from the
exterior pocket of the felt bag.
4
2