Table of Contents
Advertisement
Quick Links
SP-0108-4K
WyreStorm 1 x 8 4K HDMI 1.4 Splitter with
EDID management
Instruction Manual
Thank you for choosing this WyreStorm product.
Please read these instructions carefully before installing to avoid complications later.
1
US/CAN/MEX: +1-518-289-1294
Toll Free Technical Support: +1-844-280-WYRE (9973)
Advertisement
Table of Contents
Related Manuals for Wyrestorm SP-0108-4K
Summary of Contents for Wyrestorm SP-0108-4K
- Page 1 SP-0108-4K WyreStorm 1 x 8 4K HDMI 1.4 Splitter with EDID management Instruction Manual Thank you for choosing this WyreStorm product. Please read these instructions carefully before installing to avoid complications later. US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
-
Page 2: Table Of Contents
With HDMI 1.4a specification supports data rates up to compatibility and communication between display 10.2Gb/s, for lossless audio/video formats, full 3D and Lip devices and source Sync, the SP-0108-4K also includes 24bit True Color with Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... -
Page 3: Package Contents
• 5v mains supply included but receivers may be powered through the • DVI support up to 1920x1200 USB port of the display using Wyrestorm USB to 5v power adaptor) connections. out of •... -
Page 4: Specifications
Data communication cord:1 kV Power cord : 2 kV Cable Specifications NOTE: We advise CAT 2 High Speed HDMI cables be used to connect source and display devices - we recommend using WyreStorm HDMI cables. Care should always be taken when inserting/extracting HDMI cables – do not force connections should resistance be felt. -
Page 5: Panel Description
Panel Description Front Rear Input LED: ON - Both source device and display device are connected. OFF - Either no source connected or source connected but no display device. NOTE: A source and at least one display device must be connected for the input LED to be lit. Output LED 1-8: ON - When each corresponding outputs 1~8 are connected to a display device OFF - No display device connected... -
Page 6: I. Typical Application
Before installation, disconnect power supplies from all the devices. During installation, connect and disconnect the cables gently. Connect an HDMI 4K or HD source to the input port of the SP-0108-4K Connect HDMI 4K or HD display device (LED/LCD screen, projector) to output ports. -
Page 7: Features
30Hz. Visit wyrestorm.com for more information on 4K/HD scaling and Dolby downmixing. Insert the WyreStorm 12V power adaptor included into the SP-0108-4K power port and connect to wall outlet mains supply. After ensuring all sources and displays are properly connected to the SP-0108-4K and their own power supplies, power devices on and turn on mains power to the SP-0108-4K. -
Page 8: Troubleshooting
NOTE The SP-0108-4K must be power cycled for No Picture or Poor Quality Picture the updated EDID setting to become active. 1) Power – Are all sources, displays and matrix definitely DIP Switch Settings powered and firmly connected? Please use matrix power supply included. -
Page 9: Transmissions
1080p - 1920x1080p, 60Hz (if problems are experienced blank screen. at 60Hz, try lowering to 50Hz) Combined 4K / HD distributions - a WyreStorm EXP- 9) Electrical interference – Could any form of electrical CON-4K-DD scaler may be required between receiver and... -
Page 10: General Faq
Are WyreStorm products compatible with HDMI 1.4? HDMI 1.4 refers to a list of ‘features’ that a device is Check settings of sources and displays for compatibility... -
Page 11: Maintenance
• The unit does not operate normally or exhibits a marked Limited warranty period: change in performance. All WyreStorm products are covered by a 2 year PARTS • The unit has been dropped or the cabinet damaged. and LABOR warranty. During this period there will be no charge for unit repair, replacement of unit components or 2. -
Page 12: Glossary
NOT. WyreStorm reserves the right to change software, control Glossary codes and specifications without notice. WyreStorm will not be liable for any use of this information or any changes it may make to those products. The use Acronym Complete Term... -
Page 13: Installation Reference Log
Location Details Device resolution/audio settings Cable Number Source Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 Output 7 Output 8 Installation Notes Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343... - Page 14 Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
- Page 15 Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
- Page 16 WyreStorm Technical Support US: +1 844-280-WYRE (9973) UK:- +44 (0) 1793 230 343 Email: support@wyrestorm.com WyreStorm Technologies reserve the right to change physical appearance or technical specification of this product at any time. Visit wyrestorm.com for the latest information on products.. REV0515B...
Need help?
Do you have a question about the SP-0108-4K and is the answer not in the manual?
Questions and answers