Technibel CAFP 124 R Technical Data & Service Manual page 129

*2: 7-segment, 4-digit display for remote controller timer display
The connected unit Nos. are displayed as shown below, using the 7-segment 4-digit (
colon.
G
Display for unit Nos. 1 – 20
Not lit Not lit
1
6
3 8
4
2 7
5
Lit Lit
G
Display for unit Nos. 21 – 40
Not lit Not lit
21 26
23 28
24
22 27
25
Lit Lit
G
The meaning of the colon display changes in the same way, allowing unit Nos. up to 80 to be displayed.
G
Sample displays of the unit Nos. of connected indoor units
• Display of unit No. 1
• Display of unit Nos. 1 and 2
• Display of unit Nos. 1, 2, and 3
• Display of unit Nos. 1, 2, 3, and 4
NOTE
The colon display changes automatically every 10 seconds.
(The display does not change if higher unit numbers do not exist.)
Pressing the
onds have not passed.
*3: The total compressor operating time is displayed
(in 1-hour units) using 8 digits.
• When the first 4 digits are displayed, the top
point of the colon is lit.
• When the last 4 digits are displayed, the colon
points are not lit.
• The display of the first 4 and last 4 digits
changes automatically every 10 seconds. It can
also be changed by pressing the
NOTE
With the outdoor unit maintenance remote controller (when connected to the outdoor unit), the unit remote con-
troller check functions will not operate.
Not lit
11 16
13
9 14
12 17
10 15
Lit
Not lit
31 36
33
29 34
32 37
30 35
Lit
button switches the display immediately to the next higher level, even if 10 sec-
button.
Not lit
Meaning of display colon
18
19
20
— —
Lit
is not displayed.
Not lit
Meaning of display colon
38
39
40
— —
Lit
A
10: <Total compressor operating time>
5 - 5
: ) display and the
— —
— —
B
(A) and (B) are displayed alternately.
5