Feature Setup; About Softkeys; Dial Mode - AT&T HS8240 User Manual

FEATURE SETUP

You can set up one feature at a time as described below, or you can set up
a feature, and then move on to set up another feature. After you change
one feature, press U to exit, or select the DONE softkey to move to the
next feature.

About Softkeys

This telephone has been designed with your convenience in mind, offering
you many features which you can access using the two "softkeys" shown
in the illustration. Press U to begin viewing options. Use
scroll through the choices or to move to the next display. By pressing the
softkey below the operation indicated on the display screen, you select
that operation.
Softkey

Dial Mode

If you have touch tone service, the phone will be ready to use as soon as the
battery is charged. If you have dial pulse (rotary) service, you'll need to set
the dial mode.
1
Make sure the
2
Press U > .
3
Use the softkey to select SETUP (see "About Softkeys"). The screen
displays DIAL MODE: TONE.
4
Use the softkey to select CHANGE. The screen displays DIAL
MODE:PULSE.
5 Select DONE to move to the next feature
— OR —
Press U to exit.
To change back to touch tone dialing, repeat Steps 1 through 5. The screen
displays DIAL MODE:TONE.
6
is not displayed.
< and > to
Softkey